integra engine swap question - HondaClub.com

katalyst · 03-04-2007, 02:09 AM

will the engine & transmission from a 97 integra fit into a 94 or 95 integra?

da-dale · 06-12-2007, 10:54 PM

yes your car and those cars are dc2 models which is 94 to 01.

DoPeTeG97 · 07-20-2007, 11:16 PM

obviously it will fit, but you have to covert to obd, buddy. you can use your obd engine harness, but you will have to get an obd2 to obd1 jumper harness with a obd 1 eci

DR Performance · 08-08-2007, 12:54 AM

All you have to do is keep your Distributor, ECU, and harness. I am pretty sure your Injectors are the same, you may want to check. As long as you are using the same engine LS to LS or GSR to GSR everything is pretty much the same. Distributors are different inside however, you have to keep OBD the same. In your case 88-91 OBD0, 92-95 OBD1, 96-01 OBD2 you have to keep the Dist. and ECU the same. You have an OBD1 car 94 or 95 as you asked, just keep your Dist. and ECU and everything else should work.

DR

03-04-2007, 02:09 AM	#1 (permalink)
katalyst Junior Member Join Date: Mar 2007 Posts: 1	integra engine swap question will the engine & transmission from a 97 integra fit into a 94 or 95 integra?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-12-2007, 10:54 PM	#2 (permalink)
da-dale Junior Member Join Date: Jun 2007 Location: santa ana, California United States Posts: 4	yes your car and those cars are dc2 models which is 94 to 01.

07-20-2007, 11:16 PM	#3 (permalink)
DoPeTeG97 Junior Member Join Date: May 2007 Location: Somewhere in NC, North Carolina United States Posts: 13	obviously it will fit, but you have to covert to obd, buddy. you can use your obd engine harness, but you will have to get an obd2 to obd1 jumper harness with a obd 1 eci

08-08-2007, 12:54 AM	#4 (permalink)
DR Performance Junior Member Join Date: Jul 2007 Location: Evansville, Indiana United States Posts: 29	All you have to do is keep your Distributor, ECU, and harness. I am pretty sure your Injectors are the same, you may want to check. As long as you are using the same engine LS to LS or GSR to GSR everything is pretty much the same. Distributors are different inside however, you have to keep OBD the same. In your case 88-91 OBD0, 92-95 OBD1, 96-01 OBD2 you have to keep the Dist. and ECU the same. You have an OBD1 car 94 or 95 as you asked, just keep your Dist. and ECU and everything else should work. DR