OBD0 to OBD1 conversion - HondaClub.com

NiceTeggy · 01-30-2007, 08:45 PM

I've Been putting together a VTEC head swap for my 91 LS TEG and i"m a bit confused about something. So far I have the complete head, intake manifold, distributor, P28 ecu.
I Believe 91 Tegs came with OBD0. The head im swaping in is OBD1 (correct me if i"m wrong), P72. I've heard of this conversion plug that you can go from OBD0 to OBD1, but would I need any additional wires for the VTEC in order for the VTEC to work?

da9guy22 · 06-18-2007, 01:43 PM

i would change over some stuff on the head and keep it obd 0 just use the gsr ecu from the 92-93 integras

01-30-2007, 08:45 PM	#1 (permalink)
NiceTeggy Member Join Date: Dec 2006 Location: Bronx, New York United States Posts: 71	OBD0 to OBD1 conversion I've Been putting together a VTEC head swap for my 91 LS TEG and i"m a bit confused about something. So far I have the complete head, intake manifold, distributor, P28 ecu. I Believe 91 Tegs came with OBD0. The head im swaping in is OBD1 (correct me if i"m wrong), P72. I've heard of this conversion plug that you can go from OBD0 to OBD1, but would I need any additional wires for the VTEC in order for the VTEC to work?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-18-2007, 01:43 PM	#2 (permalink)
da9guy22 Junior Member Join Date: Jun 2007 Location: blairstown, New Jersey United States Posts: 11	i would change over some stuff on the head and keep it obd 0 just use the gsr ecu from the 92-93 integras