trunk with problems - HondaClub.com

BUILT4ACURACY · 06-26-2007, 10:22 PM

ok i have an issue with my trunk. i recently put a pair of sony 12" subs in my trunk. They are sitting on the floor in my trunk which is just a thin piece of plywood(i dont kno if all integras come like that or wat) but the board is not that steady and i need some way to make or order something as a new floor for my trunk. Any help would be greatly appreciated!!! Thanks!

**EyesofFreedom** · 06-26-2007, 10:31 PM

You could make it out of metal...stainless would be cool...and $$$

Even aluminum...just bead roll it for strenght.

And use the plywood as a template so it fits right.

**8695Beaters** · 12-10-2007, 11:45 PM

Brace the underside of the plywood. Use some 1x2s and gorilla glue. All Integras came with that kind of floor, all the way back to 1986.

Integraboy · 05-12-2008, 08:29 AM

What i did is took that crappy wood out and used it as a template on a peice of 1/4 inch plywood then used a jigsaw to cut that out and wrapped it in automotive carpet. Looks clean and its alot better of a platform for my box.( 2 12" Rockford Fosgates)

06-26-2007, 10:22 PM	#1 (permalink)
BUILT4ACURACY Member Join Date: Oct 2006 Location: Pekin, Illinois United States Posts: 40	trunk with problems ok i have an issue with my trunk. i recently put a pair of sony 12" subs in my trunk. They are sitting on the floor in my trunk which is just a thin piece of plywood(i dont kno if all integras come like that or wat) but the board is not that steady and i need some way to make or order something as a new floor for my trunk. Any help would be greatly appreciated!!! Thanks! __________________

06-26-2007, 10:31 PM	#2 (permalink)
EyesofFreedom Official Instigator! Join Date: Jun 2006 Location: Rincon, Georgia United States Posts: 2,103	You could make it out of metal...stainless would be cool...and $$$ Even aluminum...just bead roll it for strenght. And use the plywood as a template so it fits right. __________________ Myspace me... http://www.myspace.com/hondaclub_eyesoffreedom Ferio Project car build page... http://www.my2002ex.mysite.com My other passion... http://www.nscale.org/defaulteng.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-10-2007, 11:45 PM	#3 (permalink)
8695Beaters A Strapping Young Lad Join Date: Sep 2007 Location: Wilmington, Delaware United States Posts: 2,195	Brace the underside of the plywood. Use some 1x2s and gorilla glue. All Integras came with that kind of floor, all the way back to 1986.

05-12-2008, 08:29 AM	#4 (permalink)
Integraboy Junior Member Join Date: May 2008 Location: Mentor, Ohio United States Posts: 5	What i did is took that crappy wood out and used it as a template on a peice of 1/4 inch plywood then used a jigsaw to cut that out and wrapped it in automotive carpet. Looks clean and its alot better of a platform for my box.( 2 12" Rockford Fosgates)