crankshaft sensor - HondaClub.com

jjw420fins · 03-07-2007, 10:11 PM

My check engine light is on...so i hooked obd2 and it gave me code p1337, which is crankshaft sensor....anyone know the difficulty in replacing one, any tips would be appreciated....thanks

crxspeed · 03-14-2007, 07:49 PM

cranksaft sensors are usually pretty easy to change. sometimes they are mounted by the crankshaft pulley. sometimes they are in the side of the block. The hardest part about crankshaft sensors is getting to where you can get the old one out. That can be a real headache if they are mounted back by the firewall but typically they take about 10 mins. to change

**EyesofFreedom** · 03-15-2007, 03:56 PM

and most of that time is jacking the car or pulling it up on ramps...

if you can change a spark plug, then you should have no problem

03-07-2007, 10:11 PM	#1 (permalink)
jjw420fins Junior Member Join Date: Mar 2007 Posts: 8	crankshaft sensor My check engine light is on...so i hooked obd2 and it gave me code p1337, which is crankshaft sensor....anyone know the difficulty in replacing one, any tips would be appreciated....thanks

03-15-2007, 03:56 PM	#3 (permalink)
EyesofFreedom Official Instigator! Join Date: Jun 2006 Posts: 2,103	and most of that time is jacking the car or pulling it up on ramps... if you can change a spark plug, then you should have no problem __________________ Myspace me... http://www.myspace.com/hondaclub_eyesoffreedom Ferio Project car build page... http://www.my2002ex.mysite.com My other passion... http://www.nscale.org/defaulteng.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-14-2007, 07:49 PM	#2 (permalink)
crxspeed Junior Member Join Date: Mar 2007 Posts: 1	cranksaft sensors are usually pretty easy to change. sometimes they are mounted by the crankshaft pulley. sometimes they are in the side of the block. The hardest part about crankshaft sensors is getting to where you can get the old one out. That can be a real headache if they are mounted back by the firewall but typically they take about 10 mins. to change