Coilover Installation - HondaClub.com

89accordlxi · 03-20-2008, 11:53 AM

I have the basic idea of how everything goes
but my coil overs came with this little o-rings
a little bit bigger than a quarter and there pretty thick
what are theyh for

**8695Beaters** · 03-20-2008, 04:01 PM

Are you talking about the strut bushing? If they go into the top of the strut then you need to reuse them on the new coilover. Otherwise, I'm not to sure about what you are talking about.

89accordlxi · 03-20-2008, 06:33 PM

no like my coil overs came with all these orings like 20 but i talked to someone about it and they said just pull the factory springs out, and then install the coilovers just as you would with the springs then adjust

03-20-2008, 11:53 AM	#1 (permalink)
89accordlxi Junior Member Join Date: Dec 2007 Posts: 28	Coilover Installation I have the basic idea of how everything goes but my coil overs came with this little o-rings a little bit bigger than a quarter and there pretty thick what are theyh for

03-20-2008, 04:01 PM	#2 (permalink)
8695Beaters Geek In Training Join Date: Sep 2007 Posts: 1,235	Are you talking about the strut bushing? If they go into the top of the strut then you need to reuse them on the new coilover. Otherwise, I'm not to sure about what you are talking about. __________________ "I really like going fast. Just go off and meditate in the wind, you know? As corny as it sounds it works and feels good. It's a good way to just let the weight of the world off every once in a while...is this a big pose? I mean, yes this is a pose! I mean am I driving down the street to not get noticed in this thing? I mean rebellious is what this thing is I would say!!!" -James Hetfield

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-20-2008, 06:33 PM	#3 (permalink)
89accordlxi Junior Member Join Date: Dec 2007 Posts: 28	no like my coil overs came with all these orings like 20 but i talked to someone about it and they said just pull the factory springs out, and then install the coilovers just as you would with the springs then adjust