timing adjustment - HondaClub.com

honda_eg · 03-19-2008, 10:23 PM

i need to get rid of my honda now but need to fix the timing belt first. i need to know how to do the timing adjustment for a honda civic 93 cx before i can sell the car because if i dont i will get super low balled and i dont want that to happen. any tips or pics or pages i can go to to look at how to fix my timing.

Vangard · 03-20-2008, 06:57 AM

There should be marks on the crank pulley and cam pulley-you have to line up those marks and then install the belt-should be good from there

honda_eg · 03-21-2008, 04:56 AM

so you just have to make the marks which make it go to tdc on the cam gear match the mark on the engine and the crankshaftpulley mark match its mark also.
Also do you have to make the marks match before or after top dead center.

Vangard · 03-21-2008, 08:05 AM

all the marks should be top dead center-when number one cylinder is on tdc, the whole engine will be on tdc

03-19-2008, 10:23 PM	#1 (permalink)
honda_eg Junior Member Join Date: Feb 2008 Posts: 23	timing adjustment i need to get rid of my honda now but need to fix the timing belt first. i need to know how to do the timing adjustment for a honda civic 93 cx before i can sell the car because if i dont i will get super low balled and i dont want that to happen. any tips or pics or pages i can go to to look at how to fix my timing.

03-20-2008, 06:57 AM	#2 (permalink)
Vangard Member Join Date: Dec 2007 Posts: 53	There should be marks on the crank pulley and cam pulley-you have to line up those marks and then install the belt-should be good from there __________________

03-21-2008, 08:05 AM	#4 (permalink)
Vangard Member Join Date: Dec 2007 Posts: 53	all the marks should be top dead center-when number one cylinder is on tdc, the whole engine will be on tdc __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-21-2008, 04:56 AM	#3 (permalink)
honda_eg Junior Member Join Date: Feb 2008 Posts: 23	so you just have to make the marks which make it go to tdc on the cam gear match the mark on the engine and the crankshaftpulley mark match its mark also. Also do you have to make the marks match before or after top dead center.