How do I replace the ignition switch? - HondaClub.com

Johnajung · 03-09-2007, 08:05 AM

I have a '94 Accord with a broken ignition switch. I have removed the steering column cover and can see the switch It looks like there is a screw head pointing towards the dash which I can't get a screwdriver on. This is probably a simpler job than it appears to me. Any advice?

hondavet · 03-10-2007, 11:34 PM

The ignition switch is secured to the column with break-off bolts. You'll need a small hammer and chisel to remove them. Good luck.

03-09-2007, 08:05 AM	#1 (permalink)
Johnajung Junior Member Join Date: Mar 2007 Posts: 2	How do I replace the ignition switch? I have a '94 Accord with a broken ignition switch. I have removed the steering column cover and can see the switch It looks like there is a screw head pointing towards the dash which I can't get a screwdriver on. This is probably a simpler job than it appears to me. Any advice?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-10-2007, 11:34 PM	#2 (permalink)
hondavet Junior Member Join Date: Mar 2007 Posts: 2	The ignition switch is secured to the column with break-off bolts. You'll need a small hammer and chisel to remove them. Good luck.