2006 Accord - HondaClub.com

adslshopper · 09-04-2006, 05:52 PM

My 06 Accord has an "Accord" name plate on the back left of my trunk. I would like to remove it. Does anyone know if this is just glued in place and easy to remove with some WD-40?

Thanks

frankjt96 · 09-04-2006, 06:40 PM

ok this is what i did with my 93, wait for a sunny day, let back of the car sit directly in the sunlight for about 15 minutes. then take a hair dryer or heat gun and spend another 15 min. just going back and forth over the badge. then take some fishing string, about 1 foot of it, and hold it like your gonna floss your teeth. put the string behind the corner and slowly pull to the side while moving the string up and down. thats how i did it on my car. then after that badge comes off their will be some sticky stuff left on the car, just roll it off with your fingers. that should help. let me know if that worked for you?

k20a2Stitch · 09-05-2006, 09:34 PM

All honda badges are appllied with double sided tabe, the the "H" Logo on the rear will leave two holes on the bumper

Simply heat it up with a hair dryer (be careful not to burn the paint) and take fishing line and swivil from side to side, you can use bug and tar remover as well as a light compound to remove the hazyness and glue residue.

adslshopper · 10-23-2006, 09:28 PM

Sorry I didn't repsond sooner (I couldn't remember what site I asked the question on....doh!). I will give your suggestion a try and post the results.

Cheers

AP1fun · 10-23-2006, 10:53 PM

You will probably laugh, but peanut butter is a natural glue remover. (peanut oil)

*007*civic · 12-16-2006, 04:00 PM

Quote:

Originally Posted by k20a2Stitch

All honda badges are appllied with double sided tabe, the the "H" Logo on the rear will leave two holes on the bumper

.

is this true?

**TJ213** · 12-17-2006, 03:52 PM

mk2panda · 01-20-2007, 09:26 PM

try some Goo Gone you can find it at Target or something

mostballestplaer · 05-11-2008, 04:24 PM

frankjt96 has got it right but I would put some sort of anty stick or glue remover on before you use the heat gun

09-04-2006, 05:52 PM	#1 (permalink)
adslshopper Junior Member Join Date: Sep 2006 Posts: 2	2006 Accord My 06 Accord has an "Accord" name plate on the back left of my trunk. I would like to remove it. Does anyone know if this is just glued in place and easy to remove with some WD-40? Thanks

09-04-2006, 06:40 PM	#2 (permalink)
frankjt96 Member Join Date: Aug 2006 Posts: 40	ok this is what i did with my 93, wait for a sunny day, let back of the car sit directly in the sunlight for about 15 minutes. then take a hair dryer or heat gun and spend another 15 min. just going back and forth over the badge. then take some fishing string, about 1 foot of it, and hold it like your gonna floss your teeth. put the string behind the corner and slowly pull to the side while moving the string up and down. thats how i did it on my car. then after that badge comes off their will be some sticky stuff left on the car, just roll it off with your fingers. that should help. let me know if that worked for you? __________________ -Tyler

09-05-2006, 09:34 PM	#3 (permalink)
k20a2Stitch Senior Member Join Date: Aug 2006 Posts: 112	All honda badges are appllied with double sided tabe, the the "H" Logo on the rear will leave two holes on the bumper Simply heat it up with a hair dryer (be careful not to burn the paint) and take fishing line and swivil from side to side, you can use bug and tar remover as well as a light compound to remove the hazyness and glue residue. __________________ New York Integra & RSX forum

10-23-2006, 10:53 PM	#5 (permalink)
AP1fun Senior Member Join Date: Sep 2006 Posts: 683	You will probably laugh, but peanut butter is a natural glue remover. (peanut oil) __________________ [/quote]

12-17-2006, 03:52 PM	#7 (permalink)
TJ213 Super Moderator Join Date: Oct 2006 Posts: 1,624	__________________ Comma Club Member #1

10-23-2006, 09:28 PM	#4 (permalink)
adslshopper Junior Member Join Date: Sep 2006 Posts: 2	Sorry I didn't repsond sooner (I couldn't remember what site I asked the question on....doh!). I will give your suggestion a try and post the results. Cheers

01-20-2007, 09:26 PM	#8 (permalink)
mk2panda Junior Member Join Date: Jan 2007 Posts: 16	try some Goo Gone you can find it at Target or something

05-11-2008, 04:24 PM	#9 (permalink)
mostballestplaer Junior Member Join Date: May 2008 Posts: 17	frankjt96 has got it right but I would put some sort of anty stick or glue remover on before you use the heat gun

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just bought the '06 Accord Coupe	noelchristian	Accord	4	05-12-2008 08:32 PM
Whats the weight of my car?	admin	Articles	1	02-15-2008 06:01 PM
Awards for Accord!	blackwizard	Accord	12	06-02-2007 08:45 PM
Any mods for 2006 Accord V-6	cehasgr	Accord	3	10-07-2006 06:44 PM
2006 Honda Civic Hybrid Wins 'World Car of the Year Award' for Greenest Car	tom	Industry news	14	06-25-2006 08:51 PM