d16b power - HondaClub.com

4u2nv · 06-08-2006, 03:55 AM

how much power can a d16b vtec engine have n/a any1????
dyno test my engine pmax is 136.8 bhp

99d16coupe · 06-24-2006, 02:37 PM

what is a d16b i have never herd of a d16b

**EyesofFreedom** · 06-24-2006, 07:32 PM

I had a d16b7 in an 87 integra

99d16coupe · 06-25-2006, 10:31 AM

ok thanks for clearing that up

pingels · 08-12-2006, 02:45 AM

with everything stock?
is there a budget for this project?

frankinz1 · 07-19-2008, 06:13 PM

what is a good transmission for a d15z1? i was thinking either ex or si

93HondaSI · 07-20-2008, 03:18 AM

well that all depends. ecery part performes different so there reall is no "best" or max performance. I've seen SOHC motors pullin over 500whp though so i would say somewhere close to that. pretty sure that's with a MONSTER ass turbo on it too though

frankinz1 · 07-21-2008, 04:31 PM

How much more reliable are jdm compared to usdm?
Is it really cost effecive to do so?

06-08-2006, 03:55 AM	#1 (permalink)
4u2nv Junior Member Join Date: Jun 2006 Posts: 1	d16b power how much power can a d16b vtec engine have n/a any1???? dyno test my engine pmax is 136.8 bhp Last edited by 4u2nv; 06-08-2006 at 03:59 AM.

06-25-2006, 10:31 AM	#4 (permalink)
99d16coupe Junior Member Join Date: Jun 2006 Posts: 2	ok thanks for clearing that up __________________ single cams kick ass

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Want more power? (Naturally aspirated)	admin	Articles	10	02-25-2008 05:29 AM
More POWER for the D15b motor	97civicferio	Civic / Del Sol / CRX / Fit	16	01-03-2008 04:40 PM
Want more power? (Forced induction)	admin	Articles	3	10-13-2007 12:42 AM
Intakes and filters	TJ213	Articles	0	11-12-2006 11:06 PM

06-24-2006, 02:37 PM	#2 (permalink)
99d16coupe Junior Member Join Date: Jun 2006 Posts: 2	what is a d16b i have never herd of a d16b

06-24-2006, 07:32 PM	#3 (permalink)
EyesofFreedom Official Instigator! Join Date: Jun 2006 Location: Rincon, Georgia United States Posts: 2,103	I had a d16b7 in an 87 integra

08-12-2006, 02:45 AM	#5 (permalink)
pingels Junior Member Join Date: Aug 2006 Posts: 6	with everything stock? is there a budget for this project?

07-19-2008, 06:13 PM	#6 (permalink)
frankinz1 Junior Member Join Date: Jul 2008 Location: miami, Florida United States Posts: 7	what is a good transmission for a d15z1? i was thinking either ex or si

07-21-2008, 04:31 PM	#8 (permalink)
frankinz1 Junior Member Join Date: Jul 2008 Location: miami, Florida United States Posts: 7	How much more reliable are jdm compared to usdm? Is it really cost effecive to do so?