motor bore to fit b18c pistion - HondaClub.com

delslow · 08-31-2006, 02:53 AM

yea i have a d16z6 block and i was wondering could this block be bore to fit a b18c pistion without sleeves or would this even work? also will a b16 head fit on this block ?

k20a2Stitch · 08-31-2006, 12:01 PM

Quote:

Originally Posted by delslow

yea i have a d16z6 block and i was wondering could this block be bore to fit a b18c pistion without sleeves or would this even work? also will a b16 head fit on this block ?

to answer some questions....
1.8 liter b18 has more stroke and displacement then a d16 or b16 for that matter. More stroke would probalby increase rod size etc.... i dont think you'd be able to make it fit.

as for frankenstein motors. you can make any type of series head fit with any bottom end from the same series...

example...

b16 b18 b20 etc... can all be mismatched
k20 k24 etc...

boxcarracer0260 · 09-03-2006, 03:33 AM

the h22 head can bolt on to the f22 block that is the only exception to the series interchange rule

Evilegg00 · 10-23-2006, 01:55 PM

I have seen a DOHC ZC head on a D16 block b 4 in a CRX... i dont know the specs but I have seen that done.

AP1fun · 10-23-2006, 07:00 PM

Quote:

Originally Posted by boxcarracer0260

the h22 head can bolt on to the f22 block that is the only exception to the series interchange rule

F22B

The A won't work because it's SOHC

and I'm not sure on the F22c1 because I believe the crank spins the wrong way.

boxcarracer0260 · 10-27-2006, 01:04 AM

thank you for being specific on that one

AP1fun · 10-27-2006, 06:33 PM

Quote:

Originally Posted by boxcarracer0260

thank you for being specific on that one

Would hate to see someone spend 5000 on a motor that wont work but the one that will is only 2-3 thousand.

boxcarracer0260 · 11-02-2006, 12:10 AM

that is true

**EyesofFreedom** · 11-06-2006, 08:49 PM

Quote:

Originally Posted by AP1fun

Would hate to see someone spend 5000 on a motor that wont work but the one that will is only 2-3 thousand.

HA HA HA

Sometimes we just have to do it the hard way!

08-31-2006, 02:53 AM	#1 (permalink)
delslow Junior Member Join Date: Aug 2006 Posts: 1	motor bore to fit b18c pistion yea i have a d16z6 block and i was wondering could this block be bore to fit a b18c pistion without sleeves or would this even work? also will a b16 head fit on this block ?

09-03-2006, 03:33 AM	#3 (permalink)
boxcarracer0260 Senior Member Join Date: Aug 2006 Posts: 302	the h22 head can bolt on to the f22 block that is the only exception to the series interchange rule __________________ Check out me 1993 EG6 "Under Construction"

10-27-2006, 01:04 AM	#6 (permalink)
boxcarracer0260 Senior Member Join Date: Aug 2006 Posts: 302	thank you for being specific on that one __________________ Check out me 1993 EG6 "Under Construction"

11-02-2006, 12:10 AM	#8 (permalink)
boxcarracer0260 Senior Member Join Date: Aug 2006 Posts: 302	that is true __________________ Check out me 1993 EG6 "Under Construction"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-23-2006, 01:55 PM	#4 (permalink)
Evilegg00 Junior Member Join Date: Oct 2006 Posts: 8	I have seen a DOHC ZC head on a D16 block b 4 in a CRX... i dont know the specs but I have seen that done.