ZC to 88 CRX swap help - HondaClub.com

nowtirme · 08-07-2006, 07:28 PM

well as it says i need help. i just swaped a DOHC ZC for an 89 integra into my 88 crx HF i need wiring help i dont know what i need to change over. im using the stock 89 integra ECU but i dont have any spark or injector pulse can anyone help me out with this ? what pins do i need to move around and where do i move them ?

88crex · 08-16-2006, 05:00 PM

fourthgenhatch.com

zc to si and hf is kinda weird cause th zc use a dual point dist
ive done the swap before just got to the site above it give you step by step

audie_salas · 08-28-2006, 12:50 AM

the zc or D16a1 is a stronger engine, i recomended that you instal a D16z6 heaters exhaust system for a better response and aceleration

Endlesscustoms · 08-28-2006, 06:53 PM

i had a 88 d16a1 in my 85 crx and it was eazy to wire up considering i used the vacum advance distributor with the 87 integra computer it ran real strong till i blew it up cause no oil delivering pizzas it sucked now i got a stock 1.5 si motor in it that needs a clutch Good luck wiring yours up all i used was a diagram from both cars and figured out witch wire went were it just takes a little time and patience

08-07-2006, 07:28 PM	#1 (permalink)
nowtirme Junior Member Join Date: Aug 2006 Posts: 1	ZC to 88 CRX swap help well as it says i need help. i just swaped a DOHC ZC for an 89 integra into my 88 crx HF i need wiring help i dont know what i need to change over. im using the stock 89 integra ECU but i dont have any spark or injector pulse can anyone help me out with this ? what pins do i need to move around and where do i move them ?

08-28-2006, 12:50 AM	#3 (permalink)
audie_salas Junior Member Join Date: Aug 2006 Posts: 5	exelent option the zc or D16a1 is a stronger engine, i recomended that you instal a D16z6 heaters exhaust system for a better response and aceleration

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swap?	Mark0719	Integra technical	19	12-14-2007 08:32 PM
swap or new head	pricesk8er	Integra technical	21	07-20-2007 12:17 PM
bumper swap	jodyf86	Detailing, Audio, Visual Mods, Pics&Vids	7	01-21-2007 09:43 AM
To swap or not to swap?	em2racer	Civic / Del Sol / CRX / Fit	5	10-23-2006 11:09 PM
quick swap question	heavyhitter92	Accord	6	10-07-2006 10:22 AM

08-16-2006, 05:00 PM	#2 (permalink)
88crex Junior Member Join Date: Aug 2006 Posts: 9	fourthgenhatch.com zc to si and hf is kinda weird cause th zc use a dual point dist ive done the swap before just got to the site above it give you step by step

08-28-2006, 06:53 PM	#4 (permalink)
Endlesscustoms Junior Member Join Date: Aug 2006 Location: hagerstown, Maryland United States Posts: 7	i had a 88 d16a1 in my 85 crx and it was eazy to wire up considering i used the vacum advance distributor with the 87 integra computer it ran real strong till i blew it up cause no oil delivering pizzas it sucked now i got a stock 1.5 si motor in it that needs a clutch Good luck wiring yours up all i used was a diagram from both cars and figured out witch wire went were it just takes a little time and patience