HONDA CRX loose stick shift? help - HondaClub.com

JDMDream27 · 08-11-2007, 12:16 PM

I bought a crx and the stick shif is on it very loose, its a manual, and its just very loose i know its old but how do i get to be like stiffer again, like a new cars, pleae tell me how i can do that

EFR · 08-11-2007, 05:28 PM

replace the shiflinkage bushings Password:JDM Hardened Shift Linkage Bushing Kit (B-Series) | JDM Honda Parts, JDM Honda Engines / JDM Nissan Motor Swaps, Used JDM Parts - Password JDM

SRSLYJDM · 08-11-2007, 06:05 PM

Neuspeed sell the bushing kits too, but the kit comes with a short throw shifter.

You should check it out.

808crix · 09-01-2007, 03:51 PM

your best bet is to go with the polyurathane linkage bushing directly under the shifter. Gets it just tight.

08-11-2007, 12:16 PM	#1 (permalink)
JDMDream27 Junior Member Join Date: Feb 2007 Location: mason, Ohio United States Posts: 24	HONDA CRX loose stick shift? help I bought a crx and the stick shif is on it very loose, its a manual, and its just very loose i know its old but how do i get to be like stiffer again, like a new cars, pleae tell me how i can do that

08-11-2007, 06:05 PM	#3 (permalink)
SRSLYJDM Junior Member Join Date: Jul 2007 Location: Buffalo, New York United States Posts: 23	Neuspeed sell the bushing kits too, but the kit comes with a short throw shifter. You should check it out. Last edited by SRSLYJDM; 08-11-2007 at 06:09 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-11-2007, 05:28 PM	#2 (permalink)
EFR Junior Member Join Date: Apr 2007 Location: london, Other/Not listed United States Posts: 22	replace the shiflinkage bushings Password:JDM Hardened Shift Linkage Bushing Kit (B-Series) \| JDM Honda Parts, JDM Honda Engines / JDM Nissan Motor Swaps, Used JDM Parts - Password JDM

09-01-2007, 03:51 PM	#4 (permalink)
808crix Junior Member Join Date: Jun 2007 Location: Kailua Kona, Hawaii United States Posts: 27	your best bet is to go with the polyurathane linkage bushing directly under the shifter. Gets it just tight.