 |
 |
|
|
|||||||
|
|
|||||||
|
|||||||
| Civic / Del Sol / CRX / Fit Discussion of all model Civics.
 |
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-08-2007, 11:16 AM
|
#1 (permalink) |
|
Member
Join Date: May 2007
Location: Columbus, Ohio
United States
Posts: 59
|
Rear Disc Interoperability Question....
Ok, I have a '95 CIVIC with Rear Drums - and I have an opportunity to purchase STOCK '93 CIVIC SI rear disc brkes....
Will they fit on my car? Is there any other parts that I would need or do I just install the caliper and rotor?.... any help is appreciated....
__________________
 "I may be a geek, but it pays for the car!" |
|
|
|
06-08-2007, 11:36 AM
|
#2 (permalink) |
|
Official Instigator!
 
Join Date: Jun 2006
Location: Rincon, Georgia
United States
Posts: 2,103
|
if you can get the whole rear subaxle assemblies I would do that...
you may or may not need to change out things like suspension mounts...lines...brakets...etc. that way if you buy the whole rear end you will have everything you need...and when you are finished sell what you have as spare parts or take the left over parts to a metal recycler and sell for $/lb
__________________
 Myspace me... http://www.myspace.com/hondaclub_eyesoffreedom Ferio Project car build page... http://www.my2002ex.mysite.com My other passion... http://www.nscale.org/defaulteng.htm |
|
|
|
|
06-12-2007, 09:55 AM
|
#3 (permalink) |
|
Member
Join Date: May 2007
Location: Columbus, Ohio
United States
Posts: 59
|
Ok, after researching this further... i'm gonna scrap the idea for now. I think my first real mod should be a direct bolt on -- this is a bit over my head....
 ..... maybe in a few months ....
__________________
"I may be a geek, but it pays for the car!" |
|
|
|
|
06-13-2007, 02:50 PM
|
#4 (permalink) |
|
Junior Member
Join Date: Jun 2007
Location: Louisville, Kentucky
United States
Posts: 6
|
I myself am in a bit of a quandary on this topic as I want 4-whell disc brakes on my 98 Civic EX. Will the Si model of that year work? Or do I have to find something else. Any help is lovely.
|
|
|
|
|
06-29-2007, 01:07 AM
|
#6 (permalink) |
|
Official Instigator!
Join Date: Jun 2006
Location: Rincon, Georgia
United States
Posts: 2,103
|
I cant remember if it was honda tuning mag or super street but one of them did a step by step article last year about how to change out the drum system to a disc system using an Si donor...
Let me hunt around and if I find it I will post a link.
__________________
Myspace me... http://www.myspace.com/hondaclub_eyesoffreedom Ferio Project car build page... http://www.my2002ex.mysite.com My other passion... http://www.nscale.org/defaulteng.htm |
|
|
|
|
08-04-2007, 04:59 PM
|
#8 (permalink) |
|
Junior Member
Join Date: Jul 2007
Location: Evansville, Indiana
United States
Posts: 29
|
Here is a link to a good write up, just click on the 4 links at the bottom. I have been working on Honda/Acura for over 11 years. I usually know the answers to most of the questions on here and if I don't I know where the info is. --------> Shows A - Z : Tricked Out : Honda Civic: Drum-to-Disc Brakes Conversion : DIY Network
|
|
|
|
|
08-06-2007, 10:39 PM
|
#9 (permalink) |
|
Official Instigator!
Join Date: Jun 2006
Location: Rincon, Georgia
United States
Posts: 2,103
|
Tricked out...I love that show!
__________________
Myspace me... http://www.myspace.com/hondaclub_eyesoffreedom Ferio Project car build page... http://www.my2002ex.mysite.com My other passion... http://www.nscale.org/defaulteng.htm |
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
