Maintenance Required Light - HondaClub.com

Zheka · 04-12-2008, 01:22 PM

HI ALL, I HAVE 2002 ACCORD SE 4DR, 4 CYL. GUYS WHO KNOWS HOW TO RESET THAT MAINTENANCE REQUIRED LIGHT (I KNOW IT SHOULD BE RESET AFTER EACH OIL CHANGE BUT I TRIED ONCE AND IT DIDN'T WORK OUT) . THANX FOR ANY HELP/SUGGESTIONS.

**EyesofFreedom** · 04-12-2008, 03:46 PM

with the key in the ignition but in the off position push in the milage trip meter reset knob...then turn on the key but do not start the car while holding the knob in...manual says 5 seconds but usually takes 15 seconds for the light to flash and then go out! after the light flashes release the button and then turn off the key. then you can start the car and the light will remain off until the next mileage trip is hit

Zheka · 04-12-2008, 05:25 PM

Thanks, I'll try it. before i tried the same maybe because i held that knob less tham 10 seconds.

mostballestplaer · 05-12-2008, 07:57 PM

Ya you may want to get it checked out mine was on for a wile and then they told me that there was a malfunction with an oxygen sensor

04-12-2008, 01:22 PM	#1 (permalink)
Zheka Junior Member Join Date: Apr 2008 Posts: 4	Maintenance Required Light HI ALL, I HAVE 2002 ACCORD SE 4DR, 4 CYL. GUYS WHO KNOWS HOW TO RESET THAT MAINTENANCE REQUIRED LIGHT (I KNOW IT SHOULD BE RESET AFTER EACH OIL CHANGE BUT I TRIED ONCE AND IT DIDN'T WORK OUT) . THANX FOR ANY HELP/SUGGESTIONS.

04-12-2008, 03:46 PM	#2 (permalink)
EyesofFreedom Official Instigator! Join Date: Jun 2006 Posts: 2,103	with the key in the ignition but in the off position push in the milage trip meter reset knob...then turn on the key but do not start the car while holding the knob in...manual says 5 seconds but usually takes 15 seconds for the light to flash and then go out! after the light flashes release the button and then turn off the key. then you can start the car and the light will remain off until the next mileage trip is hit __________________ Myspace me... http://www.myspace.com/hondaclub_eyesoffreedom Ferio Project car build page... http://www.my2002ex.mysite.com My other passion... http://www.nscale.org/defaulteng.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-12-2008, 05:25 PM	#3 (permalink)
Zheka Junior Member Join Date: Apr 2008 Posts: 4	Thanks, I'll try it. before i tried the same maybe because i held that knob less tham 10 seconds.

05-12-2008, 07:57 PM	#4 (permalink)
mostballestplaer Junior Member Join Date: May 2008 Posts: 17	Ya you may want to get it checked out mine was on for a wile and then they told me that there was a malfunction with an oxygen sensor