|
|
||
|
|||||||
| Accord Discussion of all model Accords.
![]() |
|
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Junior Member
Join Date: Oct 2007
Location: Indianapolis, Indiana
United States
Posts: 2
|
I have an 02 accord EX V6. I bought it used and not even a week after I drove it off the lot the srs and main req lights came on. Needless to say I took it back to the dealership. They fixed it (said it was a loose ground). About 2 months later the lights came back on. Shortly thereafter I lost the ability to use my steering wheel controls for the radio and cruise control, and my horn stopped working. I've been told that the problem is probably the clock spring in the steering column. Does this sound right to everyone here? Is this something I could replace on my own or should I pay the $150 and have my mechanic do the work for me?
|
|
|
|
|
|
#2 (permalink) |
|
Official Instigator!
![]() Join Date: Jun 2006
Location: Rincon, Georgia
United States
Posts: 2,096
|
How experienced/knowledgable are you?
I ask this because working around the srs system is dangerous...especially for a novice...one wrong move and boom!...there goes $1500 The contacts are way in the column...you have to disable the srs, remove the column covers, remove the airbag, remove the wheel connector adapter, remove the steering wheel, and then you should see it... It is a lot of work and when you reconnect the srs system you have to put the plug in square...if you do it slightly lop sided you can set off the airbag. I actually had the sh*t scared out of me working on a shifter when the guy in the next bay did it...it was hilarious afterwards because he came out the car like it was on fire...had on heck of a bruise on the side of his head too!
__________________
![]() Myspace me... http://www.myspace.com/hondaclub_eyesoffreedom Ferio Project car build page... http://www.my2002ex.mysite.com My other passion... http://www.nscale.org/defaulteng.htm |
|
|
|
|
|
#4 (permalink) |
|
Junior Member
Join Date: Oct 2007
Location: Fresno, California
United States
Posts: 16
|
their is a s/b for that problem the contact ring in the bearing is not making good contact and the outer ring need to be tabbed in to the ground will complete and the audio controls and functions restore.
[IMG] [/IMG][IMG] [/IMG][IMG] [/IMG][IMG] [/IMG][IMG] [/IMG]hope this helps Last edited by dtapia; 10-16-2007 at 11:18 PM. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|