HondaClub.com - Online forum for Honda and Acura owners - View Single Post

**Mister_Perkins** · 03-16-2010, 06:31 PM

Okay, so I started replacing lines and such on the accord today and ran into a problem with bleeding the brakes. You pump the pedal up with the ignition off, and the pedal is firm. You turn the car on and it goes to the floor ? I was thinking master cylinder, but I just want to see if anyone else has had this problem. I replaced both back brake lines on the car. It used to have ABS But the kid i bought it off of removed the ABS Block. Is ABS and NON-ABS master cylinders similar ??

1996 Honda Accord EX
F22B1 Vtec Motor
ABS Removed

Thanks in advance

Brandon

03-16-2010, 06:31 PM	#1 (permalink)
Mister_Perkins Hondaclub.com Member Join Date: Mar 2010 Location: Tiona, Pennsylvania United States Posts: 654	1996 Accord EX Brake Problem Okay, so I started replacing lines and such on the accord today and ran into a problem with bleeding the brakes. You pump the pedal up with the ignition off, and the pedal is firm. You turn the car on and it goes to the floor ? I was thinking master cylinder, but I just want to see if anyone else has had this problem. I replaced both back brake lines on the car. It used to have ABS But the kid i bought it off of removed the ABS Block. Is ABS and NON-ABS master cylinders similar ?? 1996 Honda Accord EX F22B1 Vtec Motor ABS Removed Thanks in advance Brandon